CRS-200C cp3 pump common rail injector test bench
03/27/2019
BOSCH diesel injector tester CRS-308C with piezo injector tester
03/27/2019

 

High pressure common rail fuel injection pump testing equipment CRS-708C  Description:

 

CRS-708C can test common rail pump and injector by flow meter sensor, as well as Piezo injector, also can test HP0 pump. The data is also obtained by computer,19 inch LCD screen display makes the data more clear. It adopts drive singal modulation and forced-cooling system, advanced technology, steady performance, precise measurement and convenient operation.

CRS-708C can fulfill the remote assistance by internet and make the maintenance

easy to operate.

 


CHARACTERISTIC  :

 

  1. Main drive adopts the speed change by frequency change.
  2. Controlled by industrial computer in real time, Windows operating system.Fulfill the remote assistance by internet and make the maintenance easy to operate.
  3.  Flow is measured by flow sensor and displayed on 19 inch LCD.
  4. Drive signal can be adjusted.
  5. Controll the rail pressure by DRV ,rail pressure can be tested in real time and controlled automatically, it contains the high-pressure protection function.
  6. Oil temperature is controlled by forced-cooling system.
  7. Pulse width of the injector drive signal can be adjusted.
  8. Protection function of short-circuit.
  9. Plexiglass protective door, easy operation, safe protection.

 

FUNCTION:

 

Common Rail Injector

Common Rail Pump

1. test brands: 4 brands

2. test the seal performance of common rail injector.

2. test the sealing of common rail pump.

3. test the pre-injection oil quantity of common rail injector.

3. test the internal pressure of common rail pump.

4. test the max. oil quantity of common rail injector.

4. test the proportional electromagnetic valve of common rail pump.

5. test the min. oil quantity of common rail injector.

5. test oil transfer pump performance of common rail pump.

6. test the average oil quantity of common rail injector.

6. test the flux of common rail pump.

7. Test the backflow oil quantity of common rail injector.

7. measure the rail pressure in real time.

8. Data can be searched, printed and made into database.

 

TECHNICAL PARAMETER:

 

Injection testing frequency

50~3000 rpm

Fuel temperature

40±2°C

Rail high pressure

0~1800 bar

Test oil filtered precision

Input power

380V/50hz/3phase or 220V/60hz/3phase

Rotation speed

0~4000RPM

Oil tank capacity

60L

Flywheel inertia’s moment

0.8KG.M2

Center height

125MM

Output power

11KW

Overall dimension(MM)

1900×800×1550

Weight

800 kg.

Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
None of our operators are available at the moment. Please leave your message here! We will send detail technical info and quotation to you!
Our operators are busy. Please try again later
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad