Diesel High Pressure Common Rail System?
Nozzle Testers
S60H-Injection Nozzle Testers Operating Instructions

CRI 100 High Pressure Common Rail Injector Tester User Manual

Common Rail Injector Tester

Common Rail Injector Tester

CRI 100 High Pressure Common Rail Injector Tester User Manual

Support Magnetic and Piezo Injectors


Over Current and Short Circuit Protection;

1、Brief introduction

CRI200 high-pressure common rail injector tester function is used to drive common rail injector, while providing Bosch, Denso, Delphi and other common rail injector control signal to drive the high-pressure common rail injector to work,drive signal parameters can be carried out by the user according to their actual situation.

And can be saved grouped for easy maintenance personnel to high-pressure common rail injector in working condition to judge different conditions and maintenance.

2、Check the accessories

After receiving the goods, please open the box and check box items are consistent with the packing list immediately if any parts are missing, please contact the service personnel.

3、Operating Instruct ions

Front view:

a、0N/0FF, Turn on and off injector drivers;
b、ADJ, Move cursor or modify parameters;

Back view:

a、Spare jack;
b、Injector harness;
c、24V power

4、Basic operation

1) Press the ADJ button to move the cursor up and down,
2) Rotate the ADJ button left and right to adjust the parameters of the cursor’s rows,
3) Press the ON/0FF button to turn on or off the fuel injector drive

a. Injector type: BOSCH, DENSO, DELPHI, PIZEO, CAT ;
b. Injection frequency freq: 1~30hz;
c. Injection pulse width width: 0~ -6000us;

d. Setting test points point: VL, TL, LL, VE

5、After-sales service

1、Under normal use, due to product quality issues, free repair within one year ;
2、Due to the non-normal use, causing damage to the product, the user bear the maintenance costs;

3The product life- long maintenance, a year later, users bear the maintenance costs.