12PSB-TXD Diesel Fuel Injection

Introduction

12PSB-TXD Diesel Fuel Injection which is a high performance test equipment controlled by industrial computer, can test BOSCH, DENSO, DELPHI, SIMENS etc.brands mechanical pumps.

Function

1.Three style two language can be choose as customer's requirements.
2. Main engine frequency conversion, manual and automatic two operating modes.
3. Automatic mode can process multi- gears speed preset.
4. Min seale mark can be 0.5” when process Oil supply interval Angle detection
5. Automatic oil measuring and counting system.
6. Automatic oil measuring plate.
7. Equipped with DC.1 2V/24V power supply, used for magnetic valve's driving and testing.
8. Oil temperature automatic control
9. VE pump inner chamber pressure test

Feature

1.Main power is 11KW, but its torque as much as 22KW conventional test bench.
2. 600 rpm can achieve 200 times the amount of 240mL fuel test
3. Three slot strengthen work-set,pressed large volume high pressure pump forging P9 pump more stable,more safety.
4. Increasing dial minimized the oil pump transient resistance produces speed fluctuation, effectively improve the testing accuracy.
5. High performance energy-saving products,save the cost of opening, which setting access dynamic power compatibility.
6. Use low noise fuel motor. 

Technical Parameters

Model No.12PSB-TXD
Main motor power11 kw enhanced vision
Host machine source380V  /  50~60HZ 3 phase
Test bench rotate speed0~4000rpm/min
Oil supply10L/min , 20L/min
Oil supply high pressure0〜3.5Mpa
Oil supply low pressure0〜0.35Mpa
Air supply pressure range0~0.15Mpa
DC power12Vor 24V(Allow short circuit)
Shaft Centre Height125MM
Test bench height from the ground830MM  
Oil tank capacity50L  
Fuel oil temperature40±2℃
Overall dimension size(MM)2200*800*1850  
Weight1200kg