CRS-708C Common Rail Test Bench

Introduction

CRS-708C test bench is special device to test the performance of 'high-pressure common rail pump and injector, it can test common rail pump, injector of BOSCH, DENSO, DELPHI, SIE-MENS and piezo injector. And on this basis, it also can be mounted with optional EUI/EUP test system, CAT HEUI test system. It tests the common rail injector and pump by flow meter sensor with more precise and stable measurement. Pump speed, injection pulse width, oil measurement and rail pressure are all controlled by industrial computer by real time. It contains more than 400kinds of data by computer.
CRS-708C can fulfill the remote assistance by internet and make the maintenance easy to operate.

Function

Common rail pump test
1. test the sealing of common rail pump.
2. test the internal pressure of common rail pump.
3. test the proportional electromagnetic valve of common rail pump.
4. test the input pressure of common rail pump.
5. test the flux of common rail pump.
6. measure the rail pressure in real time.

Common rail injector test
1. test the sealing of common rail injector.
2. test the pre-injection of high-pressure common rail injector.
3. test the max. oil quantity of high-pressure common rail injector.
4. test the cranking oil quantity of high-pressure common rail injector.
5. test the average oil quantity of high-pressure common rail injector.
6. test the backflow oil quantity of high-pressure common rail injector.
7. Data can be searched, saved and made into database.
EUI/EUP test (optional)
CAT HEUI test (optional)

Feature

1. Controlled by industrial computer in real time, Fulfill the remote assistance by internet and make the maintenance easy to operate.
2. Oil quantity is measured by flow meter sensor and displayed on 19" LCD .
3. Percentage of drive signal can be adjusted.
4. BOSCH original rail, DRV to control rail pressure which can be tested in real time and controlled automatically. It contains the high-pressure protection function.
5. Oil temperature is controlled by forced-cooling system.
6. Pulse width of the injector drive signal can be adjusted.
7. Protection function of short-circuit.
8. Plexiglass protective door, easy operation, safe protection.

Technical Parameter

1. Pulse width: 0.1-5ms;
2. Fuel temperature: 40+2C;
3. Rail pressure: 0-1 800 bar;
4. Test oil filtered precision: 5u;
5. nput power: AC 380V/50HZ/3Phaseor 220V/60HZ/3Phase;

6. Rotation speed: 0 4000RPM;
7. Oil tank capacity: 60L;
8. Flywheel inertia' s moment: 0.8KG.M2;o Center height: 125MM;
9. Output power: 11K W;
10. Overall dimension: 1900x800x l550MM; Weight: 800 KG.o