TX200A Common Rail Injector Tester

Introduction

TX200A Common Rail Injector Tester is used to drive common rail electromagnetic and piezoelectric injector, while providing for Bosch, Denso, Delphi and other common rail injector control signal to drive the high pressure common rail injector to work, drive signal parameters can be carried out by the user according to their actual situation, and can be saved grouped for easy maintenance personnel to high pressure common rail injector in working condition to judge different conditions and maintenance.

Technical Parameters

1.Product Model: TX200
2.Testing Range: atomization, pilot, emission and full load condition.
3.Test Injectors: For BOSCH,DENSO,DELPHI,PIZEO,(electromagnetic for BOSCH, for DENSO, for DELPHI, and piezo for Bosch and for Siemens )
4.Injector conditions: CL ,VL , VE , LL ,TL, U1,U2
5.Pulse width: 100 ~ 3000uS;
6.Injection frequency: 1 ~ 30Hz
7.injector counting time: 0-2000 times
8.Working Voltage: AC220V/AC110V
9.Working Temperature: -30C°——70C°
10. supplementary fuel injector impedance measurement