Common Rail Tester
In this Common Rail Tester directory, you can find:Electronic Unit Injectors (EUI) and Electronic Unit Pumps (EUP) repair testers. Piezoelectric crystal injector testers (SIEMENS PIEZO Injector is optional item.) High-pressure pump tester, VE Pump Tester, etc. For details, please refer to related products.
Feature:1.Support for multiple rail pressure sensor.
2.Intelligent PID algorithm, the pressure control is more precise.
3.The software and hardware double short-circuit protection, Run Safer.
4.Multi-language selection, Chinese / English / Russian.
5.ecurity designed to prevent operator misuse, use more secure.
6.According to customer demand for customized software interface, operation, chassis appearance.
To ensure safe operation, please follow the following rulesin the course of operating the tester, the operator should wear safety glasses;
using a separate dedicated outlet and reliable grounding. The tester is a three-wire power cord plug is connected to a standard three-wire outlet, please ensure reliable grounding;
if the power supply voltage is unstable, please connect the power supply voltage tester uses;
regularly check the AC power cord is damaged, and the power plug or power outlet for dust accumulation;
if the tester abnormal conditions occur, or an abnormal sound or smell, or the tester can not be hot to the touch, stop using it immediately and unplug the AC power outlet power cord and all other cables；
if the tester fails, please contact the service personnel to obtain necessary assistance;
If you can't find the corresponding product with specific functions, please feel free to contact us.
TX-300A System Tester Introduction： TX-300A High-pressure system controller function is modeled engine ECU (Engine Control Unit), while providing Bosch, Delphi, Siemens common rail system controlsignals, driver and high-pressure high pressure injector pump to work, drive signal Parame […]
TX1176 High Pressure Injector Test Bench Introduction： Our independently developed TX1176 Injector Test bench with high quality is used to test the performance of high-pressure common rail injector from BOSCH, SIEMENS, DELPHI, DENSO, ect. It is controlled by industrial computer, embedded o […]
TX700 Injector Tester Introduction TX700 piezoelectric crystal injector tester simulates ECU (Engine Control Unit), and offers 3 kinds of driving signals of Siemens piezo electric crystal common rail injector, Bosch and Delphi common rail injectors. At the same time, it can drive common rail inject […]
TX200 injector tester Description Chinese，English, optional Support magnetic and piezo injectors（BOSCH, DENSO,DELPHI, PIZEO, DENSO2）； Overcurrent and short circuit protection Support magnetic injector impedance measurement; On-board temperature sensor, overheat protection; Record number of users Cu […]
TX850 pump tester Description TXP850 high-pressure pump tester function is used to drive l pump, while providing Bosch, Denso, Delphi and other pump control signal to drive the high-pressure l pump to work, drive signal parameters can be carried out by the user according to their actual situation […]
TX300 System Tester Introduction TX300 high pressure system controller function is to mimic the diesel engine ECU (Engine Control Unit), While providing Bosch, Delphi, Siemens and other system control signal to drive the high-pressure common rail injector andpump to work，drive signal parameters ca […]
TX100 Injector Test Bench Introduction Eps100 injector test bench is used to test injector from BOSCH,DENSO,DELPHI,SIEMENTS, etc. TX100 Injector Test Bench Feature Pressure is controlled automatically. Users check the frequency and pulse from screen. Advanced technology, steady performance, preci […]
TX Injector Tester Introduction The repair tester is designed to perform repair tests for different type of Electronic Unit Injectors (EUI) and Electronic Unit Pumps (EUP).The tester consists of a mechanical cam box with specified EUI/EUP adapter kits and an electronic controller, The cam box will […]